Hublot MP-05 LaFerrari
In 2013, Hublot released the MP-05 LaFerrari fake luxury watches, featuring 11 mainspring barrels and a 50-day power reserve. It ended the fierce competition among watchmakers for the longest power reserve and redefined watchmaking by breaking free from traditional constraints and drawing inspiration from supercar design. The MP-05 LaFerrari was a collaboration between Hublot and Ferrari, directly incorporating the essence of a V12 engine into its movement structure.
At the heart of the MP-05 lies the multiple mainspring barrels arranged vertically along the watch's central axis. These barrels are connected in series, ultimately achieving an astonishing 50-day power reserve. To this day, it still holds the record for the longest power reserve in a watch.
Visually, these stacked mainspring barrels resemble pistons in an engine block. During winding, the ratchet winds the first mainspring barrel directly through the shaft. As the mainspring tightens, its drum drives the intermediate wheel, which in turn winds the next mainspring barrel, and so on, until the last mainspring barrel is fully wound. Each mainspring barrel has its own shaft, but some shafts are shared by adjacent mainspring barrels, forming an interlocking sequence rather than a continuous shaft running through the entire stack. Because the mainspring barrels are stacked coaxially, the entire cylinder must remain perfectly aligned while allowing each drum to rotate freely. To minimize friction and maintain alignment, a row of ball bearings is installed next to the mainspring barrel drums. Although theoretically this system of 11 mainspring barrels can power the movement for up to 55 days, in practice it will stop operating after about 50 days. Stopping the movement before the final low-torque stage ensures that all available power reserves continue to provide energy steadily. fake swiss watches
This structure retains the linear, engine-like structure of the movement while keeping the regulating mechanism aligned with the horizontal position of the watch when it is placed naturally. In this configuration, the frame remains perpendicular to the ground, and the vertical tourbillon compensates by rotating within this plane of gravity, thus averaging rate fluctuations within that plane.
Time is displayed via rotating rollers or cylinders. On the right side of the movement are two vertically stacked rollers: the upper roller indicates the hours, and the lower roller indicates the minutes. These rollers are milled from aluminum and coated with a vibrant yellow lacquer to ensure legibility even on the exposed movement. The same structure is used on the left side of the movement, with another roller indicating the remaining power reserve.high quality fake watches
Winding the MP-05 is inherently challenging. Due to its enormous power reserve, manual winding via the traditional crown is impractical. To address this, Hublot developed a custom-designed power tool, shaped like a miniature drill bit, that engages directly with the winding shank to wind all 11 mainspring barrels in a controlled and even manner. This tool ensures consistent performance and, to some extent, enhances the watch's industrial mechanical style. The large domed sapphire crystal on the front of the dial offers a panoramic view of the movement, which is inspired by an engine. Later versions went a step further by using a full sapphire crystal case for ultimate visual impact. replica hublot MP watches
https://www.reviewluxurystore.com
http://www.moon-watch.co
https://www.grand-watch.co